Many countries and regions have different levels of the rainy season, heavy rains flooded the city is widespread. We know that the LED belonging to MSD components (moisture sensitive devices), so this humid and rainy weather will be a big challenge for LED display.
Because of damp caused by the death of LED display lights
So how to deal with the rainy season moisture from entering the LED display problems? VERYPIXEL gives you the following recommendations:
>> For indoor LED display applications, keeping a dry environment is very important.
Proper ventilation will help speed up the evaporation of water vapor on the display, which could lower indoor environment’s relative humidity; Placed some drying agent, use physical method will also help reduce the moisture in the air; Open the air conditioner to dry the moisture.
>> Outdoor LED display focuses on waterproofing
Outdoor led screen could also adopt indoor moisture-proof methods. However, outdoor led advertisement display should as well as take the waterproof maintenance into consideration, especially in rainy season. Good sealing can help reduce the risk of water influent. Periodically clean internal and external dust of led display can also help to better heat dissipation and reduce the adhesion of water vapor.
>> Waterproof is the most important thing during the production and construction for an outdoor full color LED display.
In using process, excessive humidity may cause the LED display PCB, power supply, power lines and other devices being zero oxidation corrosion and broken. So during the production of LED panel, VERYPIXEL has done a careful anti-corrosion treatment, such as surface repainting, etc., adopting high quality accessories (power supply and power cables). Choosing waterproof cabinets, good sealing function and the whole led screen reach to IP65 grade. Pay attention to do protection work, in particular on framework that easy to rust, make good anti-rust treatment.
In addition, we need to pay attention to outdoor LED display rear panel waterproof issues because in the using process, the rear panel is not only for heat dissipation, but also in dealing with water-resistant has a great convenience. When doing the waterproof coating on the back, pay more attention to the waterproof property of aluminum - plastic board on back strip - shaped display. Use an electric drill designed a line of waterspout back on the aluminum - plastic board, which both conductive to waterproof and heat dissipation.
>> High temperature and high humidity area LED display requires frequent opening and dehumidify.
Finally, both the indoor or outdoor LED screen, avoid moisture damage most effective way to display function is frequently used. on working status of the display itself will generate some heat, some of the water vapor can evaporate, thus greatly reducing the wet possibility of causing a short circuit. Insiders suggested that in the rainy season , LED display screen using one week at least once and a month to open the screen at least once, lighting time more than two hours.
In addition to the installed LED display screen in the rainy season should pay attention to waterproof and moisture, contractors and channels should have the skills of handling water inflow into LED display the warehouse.
>> LED Display Screen proper method to deal with influent water:
1, use the fan or other tools, dry the LED display screen body completely as soon as possible.
2, completely dry the screen and powered aging, concrete steps are as follows:
a, set the brightness (all white) was adjusted to 10%, power aging 8-12 hours.
b, set the brightness (white) adjusted to 30%, power aging 12 hours.
c, set the brightness (white) adjusted to 60%, power aging 12-24 hours.
d, set brightness (all white) was adjusted to 80%, power aging 12-24 hours.
e, set the brightness (all white) was adjusted to 100%, power aging 8-12 hours.
Completion of the above steps, LED display screen body will basically back to normal; but in the process also need to note the following advice's:
1, do not put the LED display screen body into the air box, it is easy to stuffy broken LED lights .
2, if warehouse inflow water, the air box may have to water influent too, that should be exposure to prevent evaporation of water in the tank installed inside the LED display.
3, in the course of emergency treatment, may occur energized dead light phenomenon.
4, all the watered LED Display Screen placed in aviation box more than 72 hours or more, will cause the led screen body substantially no repair value , please handle carefully.
Page address: http://www.verypixel.com/blog/Rainy_Season_LED_Display_Waterproof.html